Baby Control Digital BC-200 User Manual Download Page 11

Specification

Power: . . . . . . . . . . . . . . . . . . . . . . . . 

2  "AA" or "R6"  normal battery

Control: . . . . . . . . . . . .  . . . . . . . . . . 

microprocessor

Operational temperature: . . . . . . . . . 

+ 5 ÷ + 40

 

°C

Operational time: . . . . . . . . . . . . . . . 

min. 1500 hours with the normal battery

Environment:. . . . . . . . . . . . . . . . . . . 

protect the product against a direct radiant heat

      from humidity, high vapour content, splashing water

Cleaning:. . . . . . . . . . . . . . . . . . . . . . 

only dry cleaning, do not use liquids

Maintenance:  . . . . . . . . . . . . . . . . . . 

no maintenance is required

Lifetime of the product: . . . . . . . . . . . 

2 Years

Declaration of Comformity

Manufacturer:

VMD 95 Kereskedelmi és Szolgáltató Kft.

The subject of the declaration:

Baby Control Digital Apnoe Alarm Systems

The manufacturers declares that the product to which this declaration refers conforms with the 
relevant harmonized standards under the following Hungarian Directives

16/2006. (III.27.) 
IEC 60601-1-8:2004 
MSZ EN ISO/IEC 17050-1:2005

 

Place and Date of Declaration: Budapest, 2007. 01. 31.

Baby Control uses battery. The device has no physical contact with the baby and it also 

does not generate any form of energy. So it cannot have any harmful effect on the little 

human body.  

Summary of Contents for BC-200













Reviews: