4
4. Attaching rear frame to the chassis
C
A
H
2x
17 mm
2x
B
Slide the tube of the rear frame (A) into the chassis (B). Use rings
on both sides of the bolt.
Important:
Only screw the nuts finger tight for now (C). Use a
0.67-inch (17 millimetres) open- or box-end spanner.
Attention:
Add the nut and screw tight again after a couple of
weeks
1. Put the washer on the
bolt.
2. Stick the bolt through
the frame.
3. Put the second washer
on the bolt.
4. Add the nut and screw
finger tight.
Result
Summary of Contents for E-Power
Page 1: ...E Power ...