Automatic nutrient dosing and irrigation mode
Hydro-Pro controller is capable of running in conjunction with PHEC-B2 equipment, which is called
Hydro-Plus mode. In this mode, the automatic nutrient dosing, automatic water make-up, water level
detection (EC, pH, water level, and water elevation), automatic irrigation, automatic liquid dispensing
switch, and high-water temperature alarm can be set.
1. Power on
Turn on the master controller, the LOGO will be automatically displayed in the interface, waiting for the
data to be automatically updated. After the update is complete, the monitoring interface will be shown.
After the devices are turned on, the real-time data of related devices will be displayed in the interface,
including VPD, humidity, temperature, CO
2
, light, day, and night.
The day and night status is displayed in the upper left corner of the interface, and the current time and
date are displayed in the top middle position of the interface. The time is shown in the format of HH:
MM: SS and the date are shown in the format of MM-DD-YYYY.
The day and night status is determined by a light sensor on the probe, which can detect the light
intensity.
2. System Setting
Press the system setting icon to enter the setting interface.
VII. Operation Instructions
10:49:05
11-01-2020
Daytime Mode
LIGHT
ON at:
08:00
OUTPUT MAX:
80％
OFF at:
18:00
Type:
LED
HUMI
CLIMATE
44.7
%RH
%RH
Dehumidify:
90
%RH
5
%RH
Humidify:
CHANNEL 1 CHANNEL 2
30
Deadband:
TEMP
28.5
℃
℃
℃
VPD
1.73
35.0
℃
5.0
Heat:
Cool:
15.0
Deadband:
IRRIGATION
STATUS
Auto
08:30
60％
18:30
HID
FOLLOW
MODE:
CO2 PPM
1100
Deadband:
200
Target:
1200
High CO2 PPM
Protection:
5000
SYSTEM
SETTING
CONNECTION
STATUS
14
