MI 1005/MI 2005 Manual
Rev 3.1 02.2021
Page 27
The MI 1005/MI 2005 is an appliance especially
developed for use in medical technology. The
purpose of the MI 1005/MI 2005 is to connect, in
compliance with the relevant norms for electrical
safety (IEC 60601-1) and EMC (IEC 60601-1-2),
a medical appliance or system equipped with a
network interface to a non-medical appliance or
system (Single PC or local network). Examples for
the use of the MI 1005/MI 2005:
•
Connection to the practice or clinic networks
with the PC of a prolonged EEG system
• Connection to an analysis computer in the
doctor’s or consulting room with an EMG
measuring station
3. Installation
Only qualified and trained personnel should install
the MI 1005/MI 2005. Please instruct your network
systems administrator or your medicine technology
department for this pur-pose. The installation of
the MI 1005/MI 2005 is done by means of the two
pluggable Ethernet Interfaces (RJ-45-sockets). To
do this, plug the network connection cable into
the socket of the MI 1005/MI 2005, until the lock
2. Intended Use
ENGLISH
