MI 1005/MI 2005 Manual
Rev 3.1 02.2021
Page 24
The MI 1005/MI 2005 should also not be operated
in close proximity to devices that emit electroma
-
gnetically radiation to avoid electromagnetically
interferences like for example mobile phones. Po
-
tential interferences can be avoided by operating
the MI 1005/MI 2005 outside this electromagneti
-
cally environment.
1.2 Connection and Operation
When connecting the MI 1005/MI 2005 Medical
Isolator make sure that:
a. Not any telecommunication appliances,
voltage supplies or similar are connected to
the MI 1005/MI 2005. By doing so, both the
MI 1005/MI 2005 and personnel could be
harmed!
b. All connected Ethernet components
comply with IEEE 802.3 or IEEE 802.3ab
(10/100/1000-BaseT, Twisted-Pair) or
802.3bz 2.5GBase-T (MI 2005)
c. Tested and approved CAT 6 network cable
(with appropriate test mark) is used.
1. General Safety Advice
