baalbaki SPA-218, Instruction Manual

Page: 5 / 8

15
Picture - 01
03
10
14
11
12
13
05
08
02
06
09
07
01
04
01. Blade stretching knob
02. On/off Switch
03. Upper Door
04. Blade Guide
05. Blade (5/8” width)
06. Movable Table
07. Support 08. Fixed Table
09. Lower Door
10. Cut Regulator (optional)
11. Upper Wheel
12. Lower Wheel
13. Loop
14. Cut Regulator Knob
15. Voltage Selector Switch
03
10
* Blade blunt. * Change the blade.
* Unusual noises.
*The blade frequently tears.
* Difficulty to cut the product. * The blade or the wheels are
dirty. * Clean the saw according to
item 3.2.
* Wrong tension on the blade. * Regulate blade tension
according to item 5.2.1.
* The blade is off the wheels
center.
* The blade or the wheels are
dirty .
* Clean the saw according to
item 3.2.
* Fault wheels.
* Change the wheels.
* Blade slipping on wheels.
* The blade is not correctly
welded. * Change the blade.
* Turn the blade tension
regulator. See item5.2.2.
Table - 02
* The saw does not switch
on. * The saw plug is off its
socket.
* Lack of power.
* Problem with circuits of the
saw.
* Check if there is electric
power.
* Call Authorized Technical
Assistance.
* Call Authorized Technical
Assistance.
* Call Authorized Technical
Assistance.
* Put the plug on its socket.
* Steam or burn smell. * Problem with the internal or
external electric circuits of the
saw.
* Skid belts.
* Starting capacitor of the
motor with defect.
* The machine switches on
but when the product gets
contact with the blade
N°5(Pic.01) the machine
stops or works with low
speed rotation.
Problem
Causes Solutions