03
1.3 Techinical Characteristics
(*) The machine motor frequency shall be only one, 50 or 60 Hz.
Table - 01
Characteristics
Unit
ESB-SUPER
Oranges/min.
15
[V]
110/220
[Hz]
50 ou 60 (*)
[CV]
0,5
[kW/h]
0,37
[mm]
410
[mm]
330
[mm]
210
[kg]
6,7
Average Production
Voltage
Frequency
Power Rating
Consumption
Height
Width
Depth
Net Weight
Shipping Wieght
Speed
[kg]
[ rpm]
10
1750
2.1 Installation
The Juice Extractor ESB-SUPER must be placed onto a leveled stable surface approximately
850mm high.
Make sure you are connecting the equipment to the right voltage (110V or 220V).
To adjust the voltage in 110v or 220v, use the Voltage Selector Switch Nº 10 (Pic-01),
located underneath the machine.
Switch the Voltage Selector to the desired voltage.
The power plug has 2 (two) flat pins and a round pin (ground wire). All the 3 (three) pins
must be properly connected.
2. Installation and Pre Operation
2.2 Pre Operation
IMPORTANT
When placing the Crown Nº 05 or 06, check if it is firmly attached.
8
5
0
m
m
08
4.4 Operation
4.4.1 Advice
Be sure your hair is not loose in order to avoid getting caught by turning
parts which could lead to a serious accident. Tie your hair well up and/or cover your
head with a scarf.
The operation performed by not trained or skilled personnel shall be
forbidden.
Never touch turning parts with your hands or in any other way.
4. 5 AFTER THE WORK ENDS
4. 5. 1 Cares
Always clean the machine, to do the cleaning SWITCH IT OFF, AND TAKE
OUT THE PLUG FROM THE ELECTRICITY SUPPLY SOCKET .
Never clean the machine BEFORE IT IS COMPLETELY STOPED.
Fit all the machine components in their due places, before switching it on
again.
When checking the Belt tightness/current, do be careful to not have a finger
caught between the belt and pulley, not between the chain and the gears.
4. 6 MAINTENANCE
4. 6. 1 Dangers
Any maintenance is dangerous if made with the machine in movement.
SWITCH IT OFF AND TAKE OUT THE PLUG FROM THE SOCKET,
DURING ALL THE MAINTENANCE OPERATION.
IMPORTANT
In any emergency situation, always take the pug out of its socket.
4. 7 ADVICES
Electrical or mechanical maintenance shall be made by qualified persons.
The person in charge of the maintenance performances shall check the machine
works under TOTAL SAFETY CONDITIONS.
