22
Manual: SolarSpectrum H-alpha-Filter and Baader Planetarium Telecentric Systems
Example Configuration for SunDancer TZ3-S and TZ4-S
The Baader SunDancer TZ-3S
# 1363070
with 115 mm backfocus and TZ-4S
# 1363080
with 120 mm backfocus have a combined 2"/1¼" nosepiece. For
photographic use, a
# 2956220
SC / HD 2" clicklock can be connected directly to
the telescope. For visual use, an additional star diagonal in front of the telecentric is
recommended. The SolarSpectrum H-alpha-filter can be adapted to the T-2-thread of
the telecentric system. Please note the smaller aperture of the TZ-3S and the working
distance. It is no problem if the distance is increased.
Baader SunDancer II H-alpha-Filter
The SunDancer II H-alpha filter
# 2456117
uses a modified version of the TZ-3, where
the blocking filter is pre-installed in the TZ3-S, so that it can be used instantly on
telescopes with up to 80 mm of aperture. To use the SunDancer II with the TZ4-S, this
blocking filter must be moved from the TZ3-S to the TZ4-S. The connection of eyepie-
ces, cameras or reducers is done according to the manual of the SunDancer II.
You can find further information about using the SunDancer II H-alpha-filter in its
own, detailed manual.
SolarSpectrum filters do not require an additional block filter
when using the TZ3-S or TZ4-S and a D-ERF.
Baader SunDancer II with 2" BBHS star diagonal
# 2456117
for connection to the 2" SC-Clicklock
# 2956220
Um den SunDancer II H-alpha-Filter mit der
TZ-4S zu verwenden (links), muss der silbern
schimmernde Blockfilter aus der roten TZ-3S
(rechts) in die TZ-4S umgebaut werden .
SunDancer II H-alpha-filter with bino-viewer
and star diagonal in front of the filter
