This Bicycle-Sports Safety Helmet uses a quick-release buckle that is
simple and can be buckled and unbuckled without changing the
adjustment. The straps must be snugly and evenly tensioned. Place
the helmet firmly on your head and fasten the buckle.
Notice which strap is loose. Tighten the loose strap after removing the
helmet.
To tighten the chin strap,hold the buckle with one hand. Then pull the
excess strap in through.(See Diagram A).
Retention System
To tighten the rear strap,pull excess from the
rear of strap 2.Hold the helmet with one
hand.With the other hand,hold the strap
where they pass under your chin. Then pull
from side to side to balance the length of all
four straps.(See Diagram B)
The helmet must sit firmly and level on your
head. (See Diagram C)To lower the front of
4. HOW DO I ADJUST THE SIZE OF MY HELMET AND FITS ME CORRECTLY
The Bicycle-Sports Safety Helmet you have just purchased provides
protection, whether on or off the road. To insure proper use of this
helmet, familiarize yourself with its features, fit and care by carefully
reading through this manual before wearing your new helmet.
Protection and Ventilation
The outer shell allows the helmet to be rated one of the lightest
helmets while providing excellent durability and integrity. The multiple
vents with inner air channels draw the air through the helmet and over
the brow for maximum cooling.
Pad Fitting
The helmet must fit properly to be effective. With a proper fit, the
helmet will not move back and forth or side to side while fastened. If
the helmet does not fit with installed pads, simply remove them and
install a different size pad. To insure the proper fit, mix and match the
pad thickness to best conform to your head shape.
13
12
