40
Storage
If you do not use the blood pressure monitor for a prolonged period of
time, please observe the following notes:
•
Take the batteries out of the battery compartment.
•
Store the blood pressure monitor in the enclosed bag
to
protect it from dust.
•
Do not store the blood pressure monitor near heat sources.
•
Observe the information concerning the storage environment (see
chapter “Technical data”).
•
Do not place any heavy objects on the measurement computer,
the cuff or the cuff hose.
41
Troubleshooting
If a malfunction occurs, first check the points below before you send
the blood pressure monitor in to be repaired.
If error codes are shown on the display, proceed as follows:
Switch the measurement computer to sleep mode by pushing the SET
button
, the user 1 button
or the user 2 button
(see
fig. A
).
Observe the solutions provided in the following table.
Problem
Causes and solutions
The error code “E1”
and the pulse
indicator appear on
the display.
The pulse is not being measured correctly.
•
Fit the cuff correctly on your arm.
•
Repeat the measurement.
The error code “E2”
appears on the
display.
You spoke or moved during the measurement.
•
Repeat the measurement without
speaking or moving.
The error code “E3”
appears on the
display.
The cuff is not on your upper arm.
•
Fit the cuff correctly on your arm.
•
Repeat the measurement.
The error code “E4”
appears on the
display.
A measurement error has occurred.
•
Repeat the measurement.
