11
Every measurement results in different val-
ues, although the device functions normally
and
normal values are displayed.
1. Please pay attention to the following information
as well as the points listed under «Common sources
of error» and repeat the measurement.
The blood pressure values measured differ
from those measured by the doctor.
1. Record the daily development of the values and
consult your doctor about them.
7. Care and maintenance, recalibration
Periodical recalibration
Sensitive measuring devices must from time to time be checked for accuracy. We therefore recommend
a periodical inspection of the static pressure display every 1 year.
Your specialist dealer would be pleased to provide more extensive information about this.
8. Reference to standards
Device standard:
Device corresponds to the requirements of the European standard for non-invasive blood-pressure
monitor
EN1060-1 / 12:95
EN1060-3 / 09:97
DIN 58130, NIBP – clinical investigation
a) Do not expose the device to either extreme temperatures, humidity, dust
or direct sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle this carefully and
avoid all types of straining through twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not use petrol, thinners or similar
solvent. Spots on the cuff can be removed carefully with a damp cloth and
soapsuds. The cuff must not be washed!
d) Handle the tube carefully. Do not pull on it. Likewise, this is not to be
buckled or laid over sharp edges.
e) Do not drop the instrument or treat it roughly in any way. Avoid strong
vibrations.
f) Never open the device! Otherwise the manufacturer calibration becomes
invalid!
