B.Pro TS-H1, Translation Of The Original Operating Instructions

Page: 36 / 52

36
Mobile Plate Dispenser OPERATING INSTRUCTIONS
The following cleaning agents may be used on stainless-steel surfaces:
• Commercially available stainless steel cleaning agents, e.g. DeepClean Stainless Steel
• Commercially available water-based cleaning agents
• Commercially available organic-based decalcifiers or anorganic acids which do not damage
stainless steel, such as acetic acid, citric acid, sulfamic acid or phosphoric acid; contact the
cleaning agent manufacturer in case of doubt
• Soft cleaning cloth or damp microfibre cleaning cloth.
Cleaning agents which are not suitable stainless-steel surfaces are:
• All cleaning agents which may contain chlorides or hypochlorite, such as decalcifiers made
with hydrochloric acid, chlorine bleaches or similar.
The following cleaning agents may be used for powder-coated parts of the unit and
for synthetic and glass elements:
• Commercially available water-based cleaning agents
• Soft cleaning cloth
• B.PRO microfibre cleaning cloth (use with water only)
• Residue stains, especially grease splashes and accumulations of grease, can be removed
with a 30% soft soap solution and the help of a brush with synthetic or natural brushes
• Glass surfaces can be easily cleaned with commercially available glass cleaners.
Cleaning agents which are not suitable for powder-coated unit parts and synthetic
and glass parts include:
• Stainless steel cleaning agents or other abrasive cleaning agents
• Solvent-based cleaning agents
• All cleaning agents which may contain chlorides or hypochlorite, such as decalcifiers made
with hydrochloric acid, chlorine bleaches or similar
9
Unit is switched off
9
No external equipment connected
9
Mains plug disconnected from the socket outlet
9
Unit interior and exterior cooled
Warning!
Water penetrating into the housing.
Water may penetrate into the housing when cleaning the connected unit and can cause a short
circuit or an electric shock.
–
Switch off unit with the On/Off switch.
–
Pull out the mains plug to disconnect the unit from the power supply.
– Insert it into the mains plug retainer.
Cleaning agents
Cleaning unit