45
COOK I-flex
OPERATING INSTRUCTIONS
9
Unit connected to mains supply and switched on.
If the unit is connected to the power supply, the On/Off button LED will flash on the B.PRO Con-
trol control electronics.
Press the OK button for three seconds to activate the settings menu.
One of the following main menus appears on the display:
– Language
– Date/Time
– Filter settings
– Fan settings
– Quick start
– Operating hours
– Service (for B.PRO service employees only)
Use the control buttons ("Left/Right") to scroll through the menu options.
Press the OK button to confirm the menu selection.
Press on the "Back" button briefly to return one step.
Setting the language
Select the "Language" main menu.
Press the OK button to confirm.
Use the control buttons ("Left/Right") to select the required language.
Press the OK button to confirm.
Setting the date/time
Select the "Date/Time" main menu.
Press the OK button to confirm.
The date will be shown in the top display line. The time (24-hour format) is displayed on the lower
display line. The input block flashes on the display. Press OK button to jump to the next input
block.
Use the control buttons ("Left/Right") to set each input block (day/month/year and hours/
minutes) individually.
Press the OK button to confirm each input block.
The cursor jumps to the next input block.
)
The date and time are displayed when you exit the settings menu (by pressing on the "Back"
button) during operation and in standby mode.
Making settings on the
display
