b-mola NCCO1802, Operation Manual

Page: 14 / 16

If the HEPA Filter is not replaced periodically as indicated
in instructions, it may seriously affect the efficiency of the
NCCO Reactor.
Operation Method
Memory Function
ON/OFF Operation
LED Indicator
10
Maintenance & Care
Note
■
■
■
■
■
Cleaning Methods
Cleaning External Surfaces of Unit Body
Cleaning Air Inlet and Air Outlet
1
2
11
When the external power supply is stopped or
interrupted unexpectedly, the unit will automatical-
ly transfer to its internal battery power supply.
When the battery is exhausted and the unit stops
running, it will memorise the operation mode and
will return to the previous mode when external
power is re-connected to it.
WARNING
Note
Please first take out Air Inlet Cover before washing it with water
(only Air Inlet Cover can be washed with water). The main body of
the unit can be wiped with a soft dry cloth but avoid dust falling on
HEPA Filter or NCCO Reactor.
After washing the air inlet cover, please ensure that it is completely
dry before replacing onto the main unit.
Tips : A damp (non-abrasive) cloth can be used to clean the unit
surface.
Always disconnect the power
supply of the unit before any
maintenance or care process
is carried out (except replacing
filters).
(Otherwise the unit might still be running
and could cause an electrical shock causing
injury.)
It is prohibited to clean the unit with any detergent.
If cleaning the unit by using a cloth that is chemically
treated, please read the instructions supplied.
During maintenance work, do not touch the disassembled
parts randomly and ensure you do not stumble over them,
thus injuring yourself or damaging the parts.
Do not operate unit if HEAP Filter has not been installed, since
this could cause irreversible damage to NCCO Reactor.
When the power ON/OFF indicator flashes in
different colours, they indicate following situations
:
When the indicator flashes white and then blue alternately, it
indicates that the unit is off and is charging.
■
To switch on unit
Press the ON/OFF button to start operation. At the
start of operation, unit will be in normal low airflow
mode and the ON/OFF button will have a weak-white
light.
To switch to high airflow mode
Press the ON/OFF button whilst in operation and the
airflow volume will increase to high airflow mode and
the ON/OFF button will have a blue light.
To switch off unit
Press the ON/OFF button again to stop operation.
Use a soft brush or light vacuum to clean the air inlet and air outlet.
Note
WARNING:
Never rinse or soak the HEPA Filter or NCCO Reactor with water.
When storing unit for a long period of time:
①
Stop operating unit and pull power plug from power source.
②
Carry out any maintenance or care work.
③
Place the unit in a plastic or box carton, and store in a cool dry place.
Fan Speed Slow Flash Fast Flash
Blue Indicator Highest Charging & Charging
Low Power
White Indicator Lowest Charging & Charging Low Power