b-mola NCCO1802, Operation Manual

Page: 12 / 16

Parts & Components
6
Setup
1. HEPA Filter and NCCO Reactor Installation
Note
7
Firmly clip and re-fit the air inlet
cover onto the main body of the unit,
A ‘clicking’ sound should be heard
indicating successful installation.
Take out the body of the filtration
unit. Press the side clips to open the
air inlet cover.
Take out HEPA Filter and NCCO
Reactor from protective packaging
material
.
It is prohibited to clean, soak or wet any parts, or they could be damaged and so affect
the unit operation.
① ②
③ Install HEPA Filter and NCCO Reactor
combination into the body of the unit.
N.B. HEPA Filter should face upwards.
④
Screwdriver Power Adapter
Air Inlet Cover
HEPA Filter
NCCO Reactor
Unit Body
ON / OFF Button
Air Outlet
Ribbon USB Power Cord