10
SHAPE (AM Modulation Shape)
MOD FREQ (AM Modulation Frequency)
EXT | INT (External or Internal Modulation)
o
FM (Not available in PULSE and ARB mode)
ON | OFF
DEV (FM Deviation Frequency)
SHAPE (FM Modulation Shape)
MOD FREQ (FM Modulation Frequency)
EXT | INT (External or Internal Modulation)
o
FSK (Not available in PULSE and ARB mode)
ON | OFF
F-LO (FSK Low Frequency)
F-HI (FSK High Frequency)
RATE (FSK Rate)
EXT | INT (External or Internal modulation)
-
SETUPS
o
RECALL (Recall Setup from Memory)
o
LOAD ARB (Loads arbitrary waveform. Available only in ARB mode)
o
STORE (Store Setup from Memory)
o
SAVE ARB (Saves current arbitrary waveform into memory. Available only in ARB mode)
-
UTIL
o
GPIB (ACTIVE) (GPIB Address)
o
USB (ACTIVE)
o
POWER (Power On Setup)
o
SN (Serial number information)
PARAMETER Key
This key selects and displays the waveform frequency, amplitude, offset and external reference, and
allows you to adjust the parameters. When Arbitrary Waveform is selected, the display also shows the
point rate.
Figure 3.1 - Frequency Menu
F1: Freq/Rate
- (Frequency) Selects and displays the frequency. Change the frequency setting using
the cursor keys and rotary knob or numerical keypad. If a certain wavelength can't
produce the waveform at the desired frequency, the waveform generator displays an
“Out of Range” error message.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
