40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
RELEASE DATE
12/21/2021
REFERENCE NUMBER
INS-2701-00
LINE
COM
GROUND
GROUND
BASE
In-Use
Receptacle
DATA
In-Use
Receptacle
RJ45
WIRING DIAGRAM
5. Place connection(s) and/or cable inside
receptacle.
6. Attach in-use receptacle to installed anchor
base and plate with four (4) #10-32 button
head stainless steel cap screws at the base
using a 1/8” allen wrench.
7. Receptacle cover has captive #6-32 screw.
Secure receptacle by tightening captive #6-32
set screw using a 7/64” allen wrench.
Receptacle cover has two (2) openings for
in-use cord sets.
4. Place connections into bollard. Attach inner
bracket with RJ45 jack with two (2) #6-32
screws with a 7/64” allen wrench.
INSTALLATION OF IN-USE RECEPTACLE (RE3 Option)
2. Loosen two (2) #6-32 screws with a 7/64”
allen wrench to remove inner bracket with
RJ45 jack.
3. Connect incoming data cable to RJ45 jack as
per installation plan. Follow manufacturer’s
instructions as per cable and method of
connection to RJ45 jack (cable and connections
required By Others).
See wiring diagram.
1. Open receptacle cover. Receptacle cover has
captive #6-32 screw for use with a 7/64” allen
wrench.
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
Receptacle Bollard
Installation Instructions
