RELEASE DATE
12-11-16
REFERENCE
NUMBER
INS001399
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
8. Attach optical assembly to installed driver
assembly with quick disconnect.
3. Wipe inside of housing where HydroLock® plate
will sit clean of debris before inserting patented
HydroLock® plate on to junction box. Align
HydroLock® plate with pins in housing and seat
it firmly in place.
Installation
5. Connect driver assembly to Patented Hydro-
Lock™ Barrier Plate with quick disconnects.
1. Remove temporary cover.
2. Make watertight connections using waterproof
wire connectors (provided) to leads on the
bottom of Patented HydroLock® Barrier Plate
Assembly.
See wiring diagram.
4. Turn HydroLock®
Barrier Plate clockwise ¼” to
lock.
Patented
HydroLock® Barrier Plate must be
completely seated to ensure proper seal or
water may intrude. This step must be done
as stated or you will void your warranty.
HP
2
SERIES
Solid State LED with Color Tuning
Installation Instructions
6. Attach driver assembly to housing by aligning
keyhole notch under one (1) of three (3) #8 screw
heads.
7. Tighten the Phillips screws to secure driver
plate to housing.
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
WIRING DIAGRAM - HydroLock® Plate
8 wire, 2 plug HydroLock® plate. Connect incoming
primary, ground and chosen external 0-10V and CCT
controls to HydroLock® plate. Use LCT to control
CCT, Dimming, Saturation, and Hue.
hybrid (0-10v wired dimming & continuous cct /sat. and hue by LCT)
LINE
MODULE
COM
GROUND
Driver
10V
0V
0-10V Dim -
0-10V Dim +
Red
Black
0-10V CCT -
0-10V CCT +
LCT
Dimming
Continuous
CCT
10V
0V
LINE
MODULE
COM
Driver
Red
Black
LCT
wireless (0-10v dimming, continuous cct, sat. and hue by LCT)
LINE
MODULE
COM
GROUND
Driver
10V
0V
DIM 0-10V -
DIM 0-10V +
Red
Black
LCT
Dimming
hybrid (0-10v dimming wired, /continuous cct, sat. and hue by LCT)
Hydrolock
Plate
LINE
COM
GROUND
10V
0V
10V
0V
LCT
hp2/co2
wired (0-10v wired dimming & continuous cct /sat. and hue by LCT)
LINE
MODULE
COM
GROUND
Driver
10V
0V
Red
Black
Dimming
Continuous
CCT
10V
0V
0-10V Dim -
0-10V Dim +
0-10V CCT +
0-10V CCT -
0-10V Dim -
0-10V Dim +
0-10V CCT -
0-10V CCT +
LCT (Light Commissioning Tool) must be
within 10 meters range of fixture for wireless
operation.