Standard Installation
PALM TREE RING INTEGRAL
Denali Series™
iOS device (Not Included) with installed B-K Lighting Inspiration Application required for use.
11. Place cap on fixture and tighten three (3)
#8-32 set screws with 5/64” Allen wrench.
Top of screws should sit flush with fixture cap.
Warning: Do not over tighten set screw.
Doing so will compromise O-Ring seal and
will void warranty.
To Replace Module
1. Remove cap by loosening three (3) #8-32 set
screws using a 5/64” Allen wrench.
3. Loosen, then remove three (3) #2-28 screws
from optic module using .050” Allen wrench.
Remove optic holder from module.
5. Carefully remove LED module from heatsink,
and disconnect the quick disconnect from the
LED module.
Do not pull on connectors or wiring. Handle
with care.
4. Loosen and remove two (2) #4-40 screws
holding LED module to heatsink using 0.050”
Allen wrench.
2. Gently twist optic to the left so optic tabs are clear
of optic holder and carefully pull away.
8. Secure LED module to heatsink with two (2)
#4-40 screws.
7. Connect new LED module via quick
disconnects. Place new LED module onto
heatsink, lining up module with holes for
screws.
10. Line up optic tabs in the optic holder, then gently
twist to the right to secure.
9. Tighten three (3) #2-28 screws on optic module
using .050” Allen wrench to secure optic holder.
6. Spread new thermal paste in even layer on
heatsink. Line up new LED board and place on
heatsink.
RELEASED
11-04-2019
REFERENCE
NUMBER
INS-2809-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING
IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
