RELEASED
11-04-2019
REFERENCE
NUMBER
INS-2809-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING
IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
Fixture Installation
1.
Place tree ring fixture around tree.
Move fixture to desired height. Tighten
the entire assembly to the tree with
provided stand-offs.
2. Secure by hooking end of strap over two (2)
Phillips screws. Secure by tightening two (2)
Phillips screws with Phillips screwdriver.
5. Bring line voltage cable from power line to
main splice box location. Loosen cord grip on
bottom of splice box, feed line voltage cable
from power line through, then tighten cord
grip to secure.
4. Remove top of driver housing by removing (4)
#8-32 set screws using 5/64” Allen wrench.
Driver housing will be marked for primary.
PALM TREE RING INTEGRAL
Denali Series™
Standard Installation
3. Connect secondary cable then twist to secure
in place.
iOS device (Not Included) with installed B-K Lighting Inspiration Application required for use.
WIRING DIAGRAM - DMX Controls with
Inspiration Application on iOS device
LINE
MODULE
COM
Hy
droL
ock®
Plat
e
Red
Black
iOS
Bluetooth®
LCT
iOS
Bluetooth®
GROUND
Brown (LINE)
MODULE
Blue (COM)
Driver
Red (+)
Black (-)
iOS
Bluetooth®
Green (GROUND)
GROUND IN HOUSING
LINE
COM
Driver
Driver
iOS
Bluetooth®
MODULE
MODULE
Red
Black
Red
Black
LINE
MODULE
COM
Remot
e
Driver
Red
Black
GROUND
Hy
droL
ock®
Plat
e
LINE
COM
GROUND
MODULE
Driver
10V
0V
Gray (0-10V DIM -)
Violet (0-10V DIM +)
Orange (0-10V CCT +)
White (0-10V CCT -)
Dimming
Continuous
CCT
10V
0V
iOS
Bluetooth®
MODULE
Driver
10V
0V
Dimming
Continuous
CCT
10V
0V
Brown (LINE)
Blue (COM)
Green (GROUND)
Red (+)
Black (-)
Gray (0-10V DIM -)
Violet (0-10V DIM +)
Orange (0-10V CCT +)
White (0-10V CCT -)
Brown (LINE)
Blue (COM)
Green (GROUND)
Red (+)
Black (-)
LINE (BROWN)
COM (BLUE)
ASV™
Wi
re
C
onnec
to
r
iOS
Bluetooth®
GROUND (GREEN)
LINE (BROWN)
COM (BLUE)
ASV™
Wi
re
C
onnec
to
r
iOS
Bluetooth®
GROUND (GREEN)
0-10V CCT + (ORANGE)
0-10V CCT - (WHITE)
0-10V DIM + (VIOLET)
0-10V DIM - (GRAY)
LINE (BROWN)
COM (BLUE)
ASV™
Wi
re
C
onnec
to
r
GROUND (GREEN)
0-10V CCT + (ORANGE)
0-10V CCT - (WHITE)
0-10V DIM + (VIOLET)
0-10V DIM - (GRAY)
LINE
MODULE
COM
GROUND
Driver
Red
Black
DMX
MODULE
LINE
MODULE
COM
GROUND
Driver
Red
Black
DMX
120Ω
LINE
MODULE
COM
GROUND
Driver
DMX GROUND
DMX DATA +
Red
Black
DMX DMX DATA -
LINE
MODULE
COM
GROUND
Driver
DMX GROUND
DMX DATA +(WHITE W/ ORANGE)
Red
Black
DMX DMX DATA - (ORANGE)
DMX GROUND
DMX DATA +(WHITE W/ ORANGE)
DMX DATA - (ORANGE)
DMX GROUND
DMX DATA +(WHITE W/ ORANGE)
DMX DATA - (ORANGE)
iOS
Bluetooth®
iOS device must be within 5ft of fixture for
wireless operation.
iOS device controls dimming, CCT, Saturation,
and Hue using Bluetooth® wireless controls and
the application. DMX Controls (By Others) are
handled by external DMX programming.
iOS device (iPad, iPod, iPhone) with installed
B-K Lighting Inspiration application is
required.
6. Replace top of driver housing with (4) #8-32
screws with 5/64” Allen wrench.
7. Run DMX cable through hook on steel tree
strap and bring down alongside line voltage
cable.
