RELEASED
11-04-2019
REFERENCE
NUMBER
INS-2809-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING
IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
360HD™ Knuckle
Standard Installation
PALM TREE RING INTEGRAL
Denali Series™
4. Tighten (1) 3/8”-16 x 3/8” stainless steel black
oxide set screw on the stem to secure horizontal
aiming position.
Tighten (1) 1/4”-28 x 1-1/4” stainless steel black
oxide socket head cap screw to 24” minimum to
48” maximum pounds to secure vertical aiming
position
2. Rotate fixture at base and aim fixture to desired
horizontal location.
1. Use 3/16” Allen wrench to slightly loosen
(1) 3/8”-16 x 3/8” stainless steel black oxide set
screw on the stem for 360° aiming purpose.
Warning: Do not over tighten set screw.
Doing so will compromise O-ring seal and will
void warranty.
3. Use 3/16” Allen wrench to loosen (1) 1/4”-28 x
1-1/4” stainless steel black oxide socket head
cap screw at the knuckle for vertical aiming
purpose.
