Finished grade
Concrete
Wire nuts must
clear opening
6”
min.
9. Access low voltage wire inside power pipe. Make
two water tight, low voltage connections using
proper wire connectors. Wire nuts must clear
opening. Insert fixture and low voltage wire into
housing.
See wiring diagram.
10. Mount faceplate to collar using two (2) #8-32
flat head screws (included) with a 9/64” allen
wrench.
WIRING DIAGRAM
LED - For use with 12VAC LED remote
transformer or magnetic transformers only.
B-K Lighting cannot guarantee performance
with third party manufacturers’ transformers.
8. Remove temporary cover and pull out low
voltage wire.
RELEASE DATE
12/15/2021
REFERENCE NUMBER
INS-2317-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
B-K LIGHTING
ARTISTAR UPLIGHT
Flush Mount
Standard Installation
HOT
12V
12V
FIXTURE
NEUTRAL
Remote
Transformer
