RELEASE DATE
9-8-15
REFERENCE
NUMBER
INS000967
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
5. Make watertight connections from remote
transformer to fixture leads using waterproof
wire connectors (By Others).
Finished grade
Finished grade
12”
2 window
faceplate
shown
Finished grade
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
2 window
faceplate
shown
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Pea gravel or sand
Finished grade
Dirt or soil
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Finished grade
Pea gravel or sand
Finished grade
Dirt or soil
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
Finished grade
8 3/4”
2 window
faceplate
shown
Finished grade
8 3/4”
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Concrete
Wire nuts must
clear opening
6”
min.
ADJUSTABLE WELL STAR™
Installation Instructions
6. Loosen stainless steel Phillips head cap screw
on adjustable bracket, aim to desired location.
Tighten to maintain aiming position.
TECHNOLOGY
with
TECHNOLOGY
8. Once faceplate is in final position, secure
faceplate to housing by tightening three (3) #10-
24 set screws using a 1/8” Allen wrench.
7. Faceplate allows full rotational positioning.
Loosen three (3) #10-24 set screws in faceplate.
Align faceplate opening to object to be
illuminated.
4. Back fill with pea gravel or sand to allow sufficient
drainage. Install housing flush at finished grade.
See wiring diagram.
& Low Voltage
2.
Supply low voltage wiring necessary for
installation (By Others)
NOTE: Leave sufficient wire length in the
fixture housing for future service.
Finished grade
Finished grade
12”
2 window
faceplate
shown
Finished grade
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
2 window
faceplate
shown
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Pea gravel or sand
Finished grade
Dirt or soil
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Finished grade
Pea gravel or sand
Finished grade
Dirt or soil
1. Excavate trench according to designed lighting
plan 20” deep and 10” wide suitable for the
fixture housing.
3. Remove faceplate from housing using 1/8”
Allen wrench on three (3) #10-24 set screws.
Set screws are located inside faceplate
openings as illustrated. Place housing in
excavated trench and pull wire through
housing.
Finished grade
Finished grade
12”
2 window
faceplate
shown
Finished grade
LINE
12V
FIXTURE
COM
Remote
Transformer
COM
2 window
faceplate
shown
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Optical opening on
faceplate will align with
alignment arrows on
temporary cover
Pea gravel or sand
Finished grade
Dirt or soil
Stability flange
Rebar or stake (by others)
Pea gravel or sand
Finished grade
Concrete
Finished grade
Finished grade
Pea gravel or sand
Finished grade
Dirt or soil
WIRING DIAGRAM
LED - For use with 12VAC
remote transformer or magnetic
transformers only. B-K Lighting cannot
guarantee performance with third party
manufacturers’ transformers.
Low Voltage - For use with 12VAC remote
transformer.
Failure to use waterproof wire connectors
will cause fixture to fail and VOID PRODUCT
WARRANTY.
