12. LED-functional indicators
LED function indicators
Process
Red blinks once per
second during the
first 60 seconds after
powering
Device initialization time
after reset or power-up.
Red flashes
Motion detected
Red LED on for two
seconds
IR command received
Green LED blinks once
per second
Too bright detected
13.
MINI-P-PP-DIM-GH-W-FC -
Connection
Connect the B.E.G. Controls MINI-P-PP-DIM-GH-W-
FC sensor to the PP-DIM-J power pack using the
sensor’s RJ12 connector.
14. Wiring diagrams with Power
pack PP-DIM-J
Standard mode with Primary/Secondary
!
Secondary sensors and primary sensor must be
connected to the same power pack.
15. Reset of the detector
Following settings can only be changed using the
B.E.G. Controls IR-Adapter for smartphones and
app.If the configuration settings lock is activated,
the detector can be released again as follows:
• Disconnect and reconnect sensor from power
pack
• Let sensor initialize for about 31 to 59 seconds
• Disconnect sensor from power pack
• Connect sensor back to power pack and wait
for the sensor to go through self-testing
• Press the unlock button
Pressing the „RESET“ button on the remote control,
in programming open mode, will delete all of the
values set by the remote control. Sensor settings
will be set back to factory settings. 50 fc (500 Lux),
10 minute timeout.
B.E.G.
Controls
277 Highway 74 N, Suite 319
Peachtree City, GA 30269
Phone: 770-349-6341
Email: [email protected]
MAN 9118-0
91316_1
Controls
B.E.G.
Hot
White
Black
Neutral
Orange
Red
PB
Power Pack
DIM
PP-DIM-J
LED Switch
Load Off
Switch
RJ 12
RJ 12
RJ 12
6
S
Secondary
P
Primary
Load
Violett
Gray
Red
Red
ECG
Dim
0-10 V
+
–
120 - 277 VAC
24 VDC
max. 200 mA
RJ12 male
to dual
RJ12
female
splitter
RJ12
9118_MINI-P-PP-DIM-GH-W-FC_130916.indd 2
02.03.2017 12:40:46
