11
DIAMOND3
®
AUTOMIXER
GB
power tool will increase the risk of
electric shock .
d)
Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges and mov-
ing parts.
Damaged or entangled
cords increase the risk of electric
shock .
e)
When operating a power tool out-
doors, use an extension cord suitable
for outdoor use.
Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock .
f)
If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of elec-
tric shock .
3) Personal safety
a)
Stay alert, watch what you are doing
and use common sense when operat-
ing a power tool. Do not use a power
tool while you are tired or under the
influence of medication.
A moment of
inattention while operating power tools
may result in serious personal injury .
b)
Use personal protective equipment.
Always wear eye protection.
Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions
will reduce personal injuries .
c)
Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool.
Carrying power tools with
your finger on the switch or energising
power tools that have the switch on
invites accidents .
d)
Remove any adjusting key or wrench
before turning the power tool on.
A
wrench or a key left attached to a
rotating part of the power tool may
result in personal injury .
e)
Do not overreach. Keep proper foot-
ing and balance at all times.
This ena-
bles better control of the power tool in
unexpected situations .
f)
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from mov-
ing parts.
Loose clothes, jewellery or
long hair can be caught in moving
parts .
g)
If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used.
Use of dust collec-
tion can reduce dust-related hazards .
4) Power tool use and care
a)
Do not force the power tool. Use the
correct power tool for your applica-
tion.
The correct power tool will do
the job better and safer at the rate for
which it was designed .
b)
Do not use the power tool if the switch
does not turn it on and off.
Any power
tool that cannot be controlled with
the switch is dangerous and must be
repaired .
c)
Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools.
Such preventive
safety measures reduce the risk of start-
ing the power tool accidentally .
d)
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the power
tool.
Power tools are dangerous in the
hands of untrained users .
e)
Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use.
Many
accidents are caused by poorly main-
