B-band A3T, User Manual

Page: 4 / 22

44
DESCRIPTION OF CONTROLS
1. VOLUME
The VOLUME controls the output volume. At “0” it
is completely OFF. At “12” it is LOUD!
2. BASS (for bass tones)
3. MIDDLE (for midrange tones)
4. TREBLE (for high tones)
5. PRESENCE (for very high tones)
The BASS, MIDDLE, TREBLE, and PRESENCE
controls are a 4-band equalizer for controlling
tone.
The BASS TREBLE and PRESENCE tone controls
are normal boost / cut shelving controls.
The MIDDLE (midrange) tone control is a normal
boost / cut tone filter.
The center detent on these tone controls yields a
flat tone response. “+12” boosts the tone; “-12“
cuts the tone.
6. LOW BATT. (LOW BATTERY LED LIGHT)
The LED will light when the battery has lost power.
Replace the battery when this light is on.
This LED light will flash when a cable is connected
to the output jack of the pickup system. This shows
the battery is good.
BATTERY
A 9-volt battery powers the B-Band A3T preamp.
Before connecting the instrument to an amplifier or
mixer please check that a fully charged 9-volt bat-
B-BAND A3T USER’S GUIDE
Congratulations and thank you for purchasing this
fine instrument with the included B-Band pickup
system. B-Band is committed to providing the high-
est quality product that is manufactured in the true
spirit of acoustic / electric instrument aficionados.
Reading this manual thoroughly will give you the
information necessary to fully understand the ca-
pabilities of this instrument and make the operation
a simple and pleasurable experience.
CONTROLS
1. VOLUME
2. BASS
3. MIDDLE
4. TREBLE
5. PRESENCE
6. LOW BATT. (LOW BATTERY LED LIGHT)
7. CHROMATIC TUNER
8. TUNER ON / OFF BUTTON
1 2 7
6
5
8
3
4