5. ROUTER DESIGN
5.4
Ordering codes
Order codes are given for the Polish operator Orange. Another operator can be selected
by changing two digits according to Table 3
Version of firmware module
on page 6.
Expansion port
Possible participation
Ordering code
Version without expansion port
UCR11 v2F-01 set
Version with Ethernet exp. port
PORT1
UCR11 v2F-01 ETH set
Version with RS232 exp. port
PORT1 a PORT2
UCR11 v2F-01 RS232 set
Version with RS485 exp. port
PORT1 a PORT2
UCR11 v2F-01 RS458 set
Version with MBUS exp. port
PORT1 a PORT2
UCR11 v2F-01 MBUS set
Version with CNT exp. port
PORT1
UCR11 v2F-01 CNT set
Version with SWITCH exp. port
PORT1 + PORT2
UCR11 v2F-01 SWITCH set
Version with WIFI exp. port
PORT2
UCR11 v2F-01 WIFI set
Version with WMBUS exp. port
PORT2
UCR11 v2F-01 WMBUS set
Version with SDH exp. port
PORT2
UCR11 v2F-01 SDH set
Table 4: Ordering codes
Second expansion port is written after first expansion port in the ordering code.
Example:
•
Full version with Ethernet and RS232 port:
UCR11 v2F-01 ETH RS232 set
.
•
Full version with Ethernet and RS232 port in metal cover:
UCR11 v2F-01 ETH RS232 SL set
.
Router is standardly fitted with a diversity antenna for HSPA+. However, UCR11 v2 can be
fitted with a diversity antenna for CDMA on customer’s request. In this case, it is necessary to
write capital letter D behind two digits indicating the operator in ordering code.
Example:
•
UCR11 v2F-01D ETH RS485 set
.
7
12-02-21
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www
.lucom.de
