5. ROUTER DESIGN
5.7
Removing from the DIN rail
Default position of CKD2 holder, which is used for mounting the router on a DIN rail, is
shown in the following figure:
Figure 8: Default position of DIN holder
For removing from the DIN rail it is necessary to lightly push upward the router so that the
top part of the CKD2 holder hitched to the DIN rail get out of this rail and then fold out the top
part of the router away from the DIN rail.
Figure 9: Removing from the DIN rail
11
12-02-21
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www
.lucom.de
