![background image](http://html.mh-extra.com/html/b-b-sensors/wls-geh230v/wls-geh230v_operation-manual_460595020.webp)
OPERATION MANUAL
Technical changes reserved
0141 0316-112 31.08.2020
Level controller for conducting liquits
WLS-GEH230V
Electrodes of stainless steel rods, hanged from top into the medium, are ideally suited for this purpose. The reference electrode is in the middle of
the 4 diagonally arranged sensing electrodes which are placed in a span of approx. 1-5 cm. The spacing should be wide enough so that no drop
of liquid sticks back to the rods when the level falls down. These electrodes are practically maintenance free.
Cable probes are very simple to manufacture. For this purpose, multi-core silicon cable can be stripped at the end and joined to stainless steel balls
which act as weight and also contact surface. The individual weights are lowered in the container up to the desired switching point and then the
cable is tied up. For reference electrode, a bare stainless steel rope with weight can be used, which goes up to the bottom of the container. Cable
sensing elements are also very reliable and practically maintenance free.
For applications in condensate tubs and for low liquid levels, the sensing system can be constructed as a PCB which is mounted on the tank wall.
Such sensing elements should also be periodically cleaned if the medium is polluted.
Attention
Please avoid extreme mechanical and inappropriate exposure.
The device/product is not suitable for potential explosive areas and medical-technical applications.
4.
Guarantee
Congratulations on purchasing this high quality product! The quality of our articles is constantly monitored within the framework of our QM system
according to ISO 9001. If you still have a reason for complaint, we will remedy the defect free of charge within the guarantee period of 24 months,
provided that it can be proven to be due to an error on our part.
A prerequisite for the fulfillment of the guarantee is that you inform us about the defect immediately and within the granted guarantee period.
Of course, damage caused by improper use or non-compliance with the operating instructions is excluded from this guarantee. Furthermore,
defective sensors and measuring probes as well as calibration services are excluded from the guarantee.
The guarantee also expires if the product has been modified or repairs attempted. The serial number on the item label must not be changed,
damaged or removed.
If necessary repairs were carried out in addition to the guarantee, the guarantee services are free of charge, but additional services, as well as
postage and packaging costs, will be charged.
Claims beyond the guarantee due to liability or damage claims are excluded, unless they are legally stipulated.
4.1
Repair services
After the warranty period has expired, we are of course available to you with our range of services. In the event of malfunctions, simply send us the
product back with a brief description of the problem. Please do not forget to include your telephone number for any queries.
We will inform you of the amount of any repair costs before the service is carried out. The estimate is free of charge. We have to charge postage
and packaging costs for the return according to expenditure.
10 / 10