TagTemp USB Temperature Logger
0568 0037-01
0141 0315-92 28.11.2022
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Seite
2
von
14
Technische Änderungen vorbehalten
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
2.2
Security Advices
B+B Thermo-Technik GmbH assume no liability for damages occurred through failure to observe these security advices. A usage non conform
to the instructions given in this manual can damage the device
BODY AND PROPERTY DAMAGES
The national and local standards for electrical installations must be se strictly observed.
The use of the device is strictly reserved / restricted to properly schooled / qualified operators.
The system is not adequate for use in atmosphere with explosion danger.
Do not use the system in a high electric or magnetic field area
ENSURING OF PRODUCT SECURITY
The system must be operated only within the limits given in the technical Data
Exposing the system to hot temperatures (higher than the operating temperature) will cause
damages in the electronic
circuits and also damage the housing
USAGE ACCORDING TO PURPOSE
Please use the product only for the purposes for which it is conceived. In case of doubt, please first contact B+B Thermo-
Technik GmbH
DISOPOSAL
Please return the device to B+B Thermo-Technik GmbH after expiration of its lifetime
3
I
NTRODUCTION
TagTemp-USB
is a small portable electronic temperature logger. Its internal sensor measures local environment temperature and logs such
values in an electronic memory. Logged data, or ACQUISITIONS, can be later viewed and analyzed on a PC where they can be opened in
tabular and graph forms.
The
NXperience
and
LogChart II
software enables to set up the device operation mode. It is also used for viewing acquisitions. Other
parameters such as end of measurements, logging interval, etc., are easily defined through the
NXperience
and
LogChart II
software.
Acquisitions can also be exported to be analyzed in other applications, such as spreadsheet programs
3.1
Identification
The identification label is on the device body. Check if the features described are in accordance with your order.
F
IGURE
1
Front view of the device
