![background image](http://html.mh-extra.com/html/b-b-sensors/tagtemp/tagtemp_operating-manual_460600015.webp)
TagTemp USB Temperature Logger
0568 0037-01
0141 0315-92 28.11.2022
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
Seite
13
von
14
Technische Änderungen vorbehalten
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
When handling the device and its battery, observe the following
•
When the device is opened, avoid touching the electronic components and the printed circuit board to
avoid electrostatic discharge damages.
•
Pay close attention to battery polarity.
•
When closing, the cover and its sealing must be mounted correctly and carefully to ensure the
enclosure sealing.
Used batteries must be disposed in accordance to local regulations. Don’t try to recharge, dismount or heat, since
explosion may occur
10
M
OST FREQUENTLY ENCOUNTERED PROBLEMS
•
The LED is not flashing:
The LED flashing light is intentionally weak, and it can be difficult to see it in bright environments. Be sure it
is really not flashing.
•
Communication with the device fails:
o
Make sure the COM port is selected correctly and there is no other program using the same port during communication
attempts.
o
Make sure there is no physical obstacle blocking the infrared signal.
o
Make sure the cable is well connected to the PC port.
o
Make sure the port selected does not present any problem.
11
Q
UESTIONS
?
For further information about this or other products of B+B Thermo-Technik GmbH please do not hesitate to contact us at:
B+B Thermo-Technik GmbH
Heinrich-Hertz-Straße 4
78166 Donaueschingen
Deutschland
Tel.: +49 771 83160
Fax: +49 771 831650
E-Mail: [email protected]