26
BIOS SETUP
BIOS SETUP
BIOS
Set
u
p
Halt On
This field allows you to decide which type of errors you want to halt the system when
detected during Power On Self Test.
Video:
Select the type of primary video subsystem in your computer. The BIOS CMOS Setup
Utility will detect the correct video type automatically.
The information should be provided in the documentation form your hard disk vendor
or the system manufacturer. If a hard disk has not been installed select NONE and
press <Enter>.
Drive A /B:
Select the correct specifications for the diskette drive(s) installed in the computer.
CYLS.
Number of cylinders
HEADS
Number of heads
PRECOMP
Write precomp
LANDZONE
Landing zone
SECTORS
Number of sectors
None
No diskette drive installed
360K, 5.25 in
5-1/4 inch PC-type standard drive; 360 kilobyte capacity
1.2M, 5.25 in
5-1/4 inch AT-type high-density drive; 1.2 MBcapacity
720K, 3.5 in
3-1/2 inch single-sided drive; 720 kilobyte capacity
1.44M, 3.5 in
3-1/2 inch double-sided drive; 1.44 MB capacity
2.88M,3.5in
3-1/2 inch double-sided drive; 2.88 MB capacity
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array. For EGA,
VGA, SEGA, SVGA or PGA monitor adapters
CGA 40
Color Graphics Adapter, power up in 40 column mode
CGA 80
Color Graphics Adapter, power up in 80 column mode
MONO
Monochrome adapter
Base Memory / Extended Memory / Total Memory
This field displays the amount of memory detected by the system during boot up. This
is a display only field and you don't have to make changes to this field.
Base Memory : Indicates the memory installed below the conventional 1MB space.
Extended Memory : Indicates the memory installed above the 1MB space.
Total Memory : Indicates the total memory installed in the PC system.
