background image

Introduction

Introduction

 

 

In

tr

oducti

on
 

Onboard Audio Features 

 

Supports Microsoft ® DirectSound/DirectSound 3D. 

AC97 supported full duplex, independent sample rate converter for audio recording and 

playback. 

 

AGP (Accelerator Graphic Port) Port 

 

Supports 1x, 2x and 4x AGP video card.  

 

Word Size 

!

Data Path:   8-bit, 16-bit, 32-bit, 64-bit. 

!

Address Path:        32-bit. 

 

FRONT SIDE BUS FREQUENCY 

 

Supports 200MHz and 266MHz  CPU FSB. 

 

BIOS 

!

Award BIOS, Windows ® 95/98 Plug and Play compatible. 

!

Supports SCSI sequential boot-up. 

!

Flash EPROM for easy BIOS upgrades (2 Mbit). 

!

Supports DMI 2.0 function. 

 

Desktop Management Interface (DMI) 

The mainboard comes with a DMI 2.0 built into the BIOS. The DMI utility in the BIOS will 

automatically records various information about your system configuration and store these 

information in the DMI pool, which is a part of the system board's Plug and Play BIOS. DMI, 

along with the appropriately networked software, is designed for easy inventory, maintenance 

and simplify troubleshooting of computer systems.  

 

WOL (Wake-On-Lan) Port

 

One WOL connector supports Wake-On-LAN functionality. 

 

PCI Bus Master IDE Controller 

!

Two PCI IDE interfaces support up to four IDE devices. 

!

Support ATA/33, ATA/66 and ATA100 hard disk drives.  

!

Bus mastering reduces CPU utilization during disk transfer. 

!

Supports ATAPI CD-ROM, LS-120 and ZIP 

Summary of Contents for KT3 Series


















































Reviews: