Intel 810 Baby AT Mainboard
AWARD BIOS SETUP
4-17
4.9
PNP/PCI CONFIGURATIONS
CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software
PnP/PCI Configuration
PnP OS Installed
:
No
Item Help
Reset Configuration Data
: Disabled
Resources Controlled By
: Auto (ESCD)
Menu Level
Ø
X
IRQ Resources
: Press Enter
X
DMA Resources
: Press Enter
Select yes if you are
X
Memory Resources
: Press Enter
Using a plug and play
Capable operating
system. Select no if
PCI/VGA Palette Snoop
: Disabled
you need the bios to
Assign IRQ For VGA
: Enabled
configure non-boot
Assign IRQ for USB
: Enabled
device.
Reset Configuration Data :
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system reconfiguration has caused such a serious conflict that the operating
system can not boot.
Resources Controlled by :
(Default setting: Manual)
The Award Plug and Play BIOS has the capacity to automatically configure all of the
boot and Plug and Play compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system such as
Windows
95. If you set this field to “manual” choose specific resources by going
into each of the sub menu that follows this field (a sub menu is preceded by a “
Ø
”).
The choice: Auto(ESCD), Manual.
PCI/VGA Palette Snoop:
(Default setting: "Disabled")
Some display cards are non-standard VGA card (such as graphics accelerator or
MPEG Card) which may not display color properly on your screen. “Enable” the
setting in this field may correct this problem. Please leave it “Disabled” as the
default setting shown above if you are using the normal display card.
