Intel 810 Baby AT Mainboard
INTSTALLATION
2-1
2.
INSTALLATION
2.1
UNPACKING
The mainboard contains the following components. Please inspect the following
contents and confirm that everything is there in the package. If anything is missing or
damaged, call your supplier for instructions before proceeding.
l
This mainboard.
l
CPU Booster module ( optional )
l
One USER‘S MANUAL.
l
One Cable set for IDE and Floppy, COM port … etc devices.
l
One Retention Mechanism (It is mounted on the mainboard).
l
One CD diskette for device driver and utility programs.
This mainboard contains electrostatic sensitive components and it can be easily
damaged by static electricity. So please leave it sealed in the original packing until
when installing.
A grounded anti-static mat is recommended when unpacking and installation. Please
also attached an anti static wristband to your wrist and have it grounded to the same
point as the anti-static mat.
After the opening of the mainboard carton, please observe the mainboard carefully to
make sure there is no shipping and handling damage before you can start to install the
PC system.
Having finished all the procedures above, you are now ready to install the mainboard to
the chassis. Please make sure that the chassis is designed for the Baby-AT mainboard so
that the mounting hole will match with this mainboard. This mainboard supports both
AT and ATX type of power supply. You may connect either type of the two power
supply and this mainboard will detect the power supply automatically.
