Intel 810 Baby AT Mainboard
INTRODUCTION
1-6
¥
ACPI FUNCTIOS (PC99 COMPLIANT)
Advanced Configuration and Power Interface (ACPI) features are available on this
mainboard. It will let you have many additional features and that will make your PC
system becomes very friendly and convenient. Followings are the ACPI features
designed on the board:
1. Microsoft PC99 compliant, fully supports S0, S1, S2, S4 and S5 system
operating status
2. System resumes by Panel-switch, Keyboard, PS/2 Mouse, Modem ring-in, Phone
ring-in ,LAN signal …. etc.
3. One LED (LED1) onboard to indicate the S5 status (Soft Off status)
¥
WOL PORTS
One WOL connector supports Wake-On-LAN (WOL up-designed)
¥
SB-LINK PORTS
(Optional)
One SB-LINK feature connector to support PCI sound cards. (such as Creative™
Labs EMU8008 sound chip)
¥
USB PORTS
Two Universal Serial Bus (USB) ports.
¥
IDE PORTS
Two channels of Ultra DMA33/66 Bus Master IDE ports, which will support up to
4 IDE devices like IDE hard disk, ATAPI CD-ROM and LS-120/ZIP-100 devices.
The IDE ports can be programmed to support PIO Mode 4, DMA mode 2 and Ultra
DMA/33/66.
¥
SUPER I/O PORTS
1. One PS/2 Mouse connector and One AT type Keyboard connector.
2. Two high speed NS16C550 compatible serial ports (UARTs).
3. One SPP/EPP/ECP mode Bi-directional parallel port.
4. One Floppy Disk Control port.
4.
One HP-SIR, SHARP-IR compatible IR port. Consumer Remote Control
supports RC-5, RC-6, NEC, RCA and RECS 80.
(When W83627HF is installed on the board, it supports hardware monitoring)
6. One digital Game and MIDI (compatible with MPU-401 UART mode) port.
¥
3D SOUND
AC97 audio interface is designed on board for 3D Sound Effect.
¥
TV-OUT (OPTIONAL)
One TV-OUT connector and daughter board (optional) for TV display requirement.
