VIA 693A ATX
MAINBOARD
HARDWARE SETUP
3-18
3.5
INSTALLATION OF DEVICE DRIVERS
There is a CD which comes with the mainboard. The CD contains the device
drivers which is necessary when installing the mainboard. Please refer to the
following procedures to install the device drivers.
A. Install the device drivers for this mainboard:
Before you can start to use this mainboard in your PC system, you will have to
install some device driver so that it will work with operation system properly.
Please refer to the following procedure to install the device drivers of the
mainboard.
Step1. Insert the CD into the CD ROM drive .
Step2. Select "D:\Driver\Mainboard\VIA\Pentium_II" directory. ( Note: "D:"
is the device name of your CD ROM drive)
Step3. Run "SETUP.EXE" in this directory and follow the screen display to
install the mainboard device driver.
B. Install the device driver for the Hardware Monitoring
(optional)
(Please note that the Hardware Monitoring is optional on the board)
Step 1. Insert the CD into the CD ROM drive.
Step 2. Select directory "\Driver\mainboard\Hardware Monitoring\W83783S"
Step 3. Run "SETUP.EXE" to install the hardware monitoring program.
IMPORTANT NOTICE:
This mainboard is supported by the Windows 2000 operation system. So you need
not to install the device drivers mention above in Step A. Some fatal error may
occur to the operation system if you install the device driver.
Please do not install the mainboard device driver
when using Windows 2000!
