PT-6IFB
SYSTEM BOARD
AWARD BIOS SETUP
I.
2
3.
Slide the clip (A) on each support toward the processor, exposing the hole that
will fit over the peg on the motherboard. Push the latches (B) on the processor
toward the center of the processor until they click into place.
4.
Hold the processor so that the fan shroud is facing toward the pegs on the
motherboard. Slide the processor (C) into the retention mechanism and slide the
supports onto the pegs. Ensure that the pegs on the motherboard slide into the
holes in the heatsink support and that the alignment notch in the processor fits
over the plug in Slot 1. Push the processor down firmly, with even pressure on
both sides of the top, until it is seated.
A
B
C
5.
Slide the clips on the supports (D) forward until they click into place to hold the
pegs securely. (Apply slight pressure on the peg and push the peg toward the clip
while pushing the clip forward.) Push the latches on the processor (E) outward
until they click into place in the retention mechanism. The latches must be
secured for proper electrical connection of the processor.