background image

The 

AZZA

 366 MAINBOARD SERIES      

Page 8 

Connectors

Connectors 

       One connector for IrDA interface (optional). 

       Two IDE connectors. 

       One floppy drive interface supports up to two 2.88MB floppy drives. 

       One 20-pin ATX power supply connector.

 

•       

CPU and chassis fan connectors. 

•       

One CD audio-in connector. 

•       

One internal audio digital interface (S/PDIF) connector. (optional

•       

One system management bus (SMB) connector. (optional)  

 

 

AT

AT

X Double Deck Ports (PC 99 color

X Double Deck Ports (PC 99 color

-

-

coded connectors)

coded connectors)

 

 

Two USB ports. 

Two external DB-9 serial port connector: COM 1 and COM 2 (UART). 

One SPP/ECP/EPP DB-25 parallel port. 

One mini-DIN-6 PS/2 mouse port. 

One mini-DIN-6 PS/2 keyboard port. 

One game/MIDI port. 

Three audio jacks: speak-out, line-in and mic-in. 

 

PCI Bus Master IDE Controller

PCI Bus Master IDE Controller

 

 

Two PCI IDE interfaces support up to four IDE devices. 

The 366X-AS366X-AV and 366A-AV models support ATA/33, ATA/66 and 
ATA/100 hard drives. 

The 366A-BV models support ATA/33, ATA/66 and ATA/100 and ATA/133 hard 
drives. 

PIO Mode 3 and Mode 4 Enhanced IDE (data transfer rate up to 16.6MB/sec.). 

Bus mastering reduces CPU utilization during disk transfer. 

Supports ATAPI CD-ROM, LS-120 and ZIP. 

USB 

USB 

Ports

Ports 

USB allows data exchange between your computer and a wide range of simultaneously 

accessible external Plug and Play peripherals. The 366X-AS,  366X-AV and 366A-AV 

models are equipped with 6 USB connectors.  The 366A-BV models are equipped with 

four USB connectors.  USB 1 and USB 2 are external connectors. They can be found on 

the PC 99 ATX connector. The other USB connectors are internal connectors and can be 

used to connect other USB devices. (Cables for the internal connectors are sold 

separately).

 

Please note that the internal USB connectors are non-standard. When you pur-

chase the cable please ensure that the connector on one side of the cable is 

compatible with the internal USB connector and the connector on the other 

side of the cable is a standard USB connector. 

Introduction 

Summary of Contents for 366A-AV


















































Reviews: