The
AZZA
366 MAINBOARD SERIES
Page 40
Min. Power Saving
Minimum power management. Suspend Mode = 1 hr.
Max. Power Saving
Maximum power management -- ONLY AVAILABLE FOR SL
CPU. Suspend Mode = 1 min.
User Defined
Allows you to set each mode individually. When not disabled,
each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and disable.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be pow-
ered down while all other devices remain active.
Suspend Mode
When enabled, after the set time of system inactivity, all devices except the CPU will be
shut off.
Video Off Option
When enabled, this feature allows the VGA adapter to operate in a power saving mode.
Always On
Monitor will remain on during power saving modes.
Suspend --> Off
Monitor blanked when the systems enters the Suspend mode.
All Modes --> Off
Monitor blanked when the system enters any power saving mode.
Video Off Method
This determines the manner in which the monitor goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and hori-
zontal synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support
Select this option if your monitor supports the Display Power Man-
agement Signaling (DPMS) standard of the Video Electronics Stan-
dards to select video power management values.
MODEM Use IRQ
This determines the IRQ which the MODEM can use for power saving purposes. This
mainboard has the ACPI feature designed on the board and it will “wakeup” automatically
when it detects an incoming modem Ring-in signal. Before you can use the Ring-in signal
to wakeup your PC system, you have to install the “External” modem to your PC system
and tell the PC system which serial port connects to the modem by selecting the IRQ in
this field, (officially, COM 1 uses IRQ4, and COM 2 uses IRQ3)
Managing The PC BIOS
