- 4 -
Note:
•
The STA automatically transitions to Legacy PS mode when no data is being sent or received.
•
The STA automatically disables PS mode when data is being sent or received.
MEASURING WLAN THROUGHPUT
The throughput measurement shows the performance of the TCP/IP layer over the wireless link. To achieve the best
results,
run the measurement test in a clean environment with as little interference as possible . The test can be run with the
adapter
connected to either an Infrastructure network (see Fig. 2.2) or an ad hoc network (see Fig. 2.3). An AP that is known to
be
in good working order should be used for the infrastructure mode test.
MEASURING THROUGHPUT USING NETIQ CHARIOT
Test Procedure
1.
Bring up the AW-NM230NF-H demo boar
with the IP address set as 192.168.1.110.
2.
Connect the reference computer with Chariot Console, which is assigned an IP address of 192.168.1.100, to the LAN
HOST
COMPUTER.
AW-NM230NF-H
EndPoint
Reference
Computer
Chariot
Console
HOST
COMPUTER.
AW-NM230NF
-H
EndPoint
A
P
LAN
Port
Reference
Computer
Chariot
Console
FIG. 2.2
FIG. 2.3
