AzureWave AW-NM230NF-H, User Manual

Page: 22 / 25

- 22 -
section in reset. This pin has an internal 200k
ohm pull down resistor that is enabled by
default. It can be disabled through programming.
29
NC
No Connect Floating
30 NC No Connect Floating
31 NC No Connect Floating
32
GND
Ground
GND
33 NC
No Connect Floating
34
NC No Connect Floating
35 GND Ground
GND
36 NC
No Connect Floating
37 NC No Connect Floating
38
GND Ground GND
39
NC
No Connect Floating
40 NC No Connect Floating
41
GND Ground GND
42
NC
No Connect
Floating
43
NC
No Connect Floating
44
NC
No Connect Floating
45
WL_DIS#
Used by PMU to power up or power down the
internal regulators used by the WLAN section.
Also, when deasserted, this pin holds the WLAN
section in reset. This pin has an internal 200k
ohm pull down resistor that is enabled by
default. It can be disabled through programming.
I
3.3V
46
WL_DEV_WAKE_HO
ST
WL Host Wake
O
3.3V
47 SDIO_D3 SDIO Data Line 3 I/O
3.3V
48 SDIO_D2 SDIO Data Line 2 I/O
3.3V
49 SDIO_D1 SDIO Data Line 1 I/O
3.3V
50 SDIO_D20 SDIO Data Line 0 I/O
3.3V
51 SDIO_CMD SDIO Command Input I/O
3.3V
52 SDIO_CLK SDIO Clock Input I
3.3V
53 BT_DEV_WAKE_HOS
T
BT Host Wake O
3.3V