AzureWave AW-NA830, User Manual

Page: 13 / 47

3-5
Give up WiFi-AP Solo Wizard and keep the last configuration.
Setup TCP/IP
You have to setup the TCP/IP by following the configuration of connect access point. The
following setting should match the configuration of access point you join. Please check the
setting of it.
z
Select Station Type
z
Back
Go back to previous step ~ Select the IBSS connection list
z
Finish
All settings of infrastructure are finished.
3.1.1 3.2.2
Build Ad-Hoc networking mode network
It is easy to build up Ad-Hoc type network with WiFi-AP Solo Wizard. The next step after select
Ad-Hoc type network is to select the desired connection.
Select The IBSS Connection List
In this step, you could select the present Ad-Hoc station to join. In addition, you could create
another Ad-Hoc station by press “New IBSS” button.
z
SSID list box
Display all present Ad-Hoc station around this system.