AzureWave AW-NA830, User Manual

Page: 6 / 47

2-3
z
Optical drive for utilities and driver installation
Easy hardware installation
Because of the AzureWave802.11 n/b/g USB WLAN Module comes embedded in motherboard,
no hardware installation is necessary. Just connect the antenna, install the driver and utilities
from the motherboard support CD and start wireless communication immediately.
54Mbps speed wireless travel
The AzureWave802.11 n/b/g USB WLAN Module provides up to five times more data
transmission than IEEE 802.11b/g standards, and breaks the wireless transmission barrier to
fasten speed up the internet connection.
WiFi-AP Solo WizardEZ-Setup (WLAN) wizard
Easy-use wireless LAN setup wizard helps you to connect with present wireless network. The
step-by-step wizard provides a convenient way to facilitate the complex wireless LAN setup
process.
Automatic wireless establishment
The utility software application of AzureWave Wireless LAN USB Module automatically
searches and reports the hot spots around it and the wireless signal quality and WEP capability
associated with each hot spot. Then you could connect to the most suitable wireless node
1.4 1.3
Supported network setup
You can use AzureWave802.11 n/b/g USB WLAN Module in various wireless network
configurations. We recommend you to select the most appropriate configuration for your home
or office network before setting it up.
1.4.1 1.3.1
Ad-Hoc mode
Ad-Hoc wireless networks bring together
workstations and computers to act as servers to all
other users on the network without complex
infrastructure, setup or administration. Users on the
network can share files, printers and access the
internet with a shared modem. When in ad hoc
mode, the AzureWave802.11 n/b/g USB WLAN