3-7
New IBSS
Create a new Ad-Hoc station by the shown-up
dialog instead of joining with a present Ad-Hoc
node. In this dialog, you could configure network
name, applied channel, authentication and
encryption rule on this Ad-Hoc node. After
creating a new Ad-Hoc node, the steps of build
Ad-Hoc network connection is finished.
Refresh
Rescan the Ad-Hoc stations nearby this system.
Back
Go back to previous step ~ Select Station Type.
Next
The wizard will show up the contents of profile. You should set it up to match the security
configuration with selected Ad-Hoc station. Then the steps are finished.
Cancel
Give up Wi-Set Wizard and keep the last configuration.
3.4
Build Soft AP network
Setup a Wireless Network
The setting of Soft AP could settle done
by either convenient “Normal User” or
complex “Advanced User” operation.
Normal User
