3-6
administrator of access point. The invalid network key will stop going to next step.
Cancel
Give up Wi-Set Wizard and keep the last configuration.
Setup TCP/IP
You have to setup the TCP/IP by
following the configuration of connect
access point. The following setting
should match the configuration of access
point you join. Please check the setting
of it.
Back
Go back to previous step ~ Select the
IBSS connection list
Finish
All settings of infrastructure are
finished.
3.3.2
Build Ad-Hoc networking mode network
It is easy to build up
Ad-Hoc
type network with Wi-Set Wizard. The next step after select
Ad-Hoc
type network is to select the desired connection.
Select The IBSS Connection List
In this step, you could select the present
Ad-Hoc station to join. In addition, you
could create another Ad-Hoc station by
press “New IBSS” button.
SSID list box
Display all present Ad-Hoc station
around this system.
