23
ELECTRICAL SWITCHES
Electrical switches control the power supply to your boat components. Switches may be 2-position
(on/off) or 3-position (on/off/on) with the center position being off. For a 3-position switch, the
switch position determines which components are being powered. All switches have a push button
reset breaker next to, below or above the switch. The breaker protects electrical components from
damage by power surges. If you reset a breaker and it immediately trips again, do not attempt to
reset it a second time. Retripping indicates a possible electrical problem that needs dealer attention.
If you replace a breaker, replace it with the same AMP size breaker.
Typical Azure Switch panel:
Switches & Breakers
Your switches may be different depending
on your model of Azure.
The following table summarizes information about Azure boat switches. Your boat may not have all
of the switches listed.
Note that some components, such as the stereo, are still powered even though the ignition switch is
off. Turn off all switches to prevent the discharging of your battery.
INSTRUMENTS
The instruments installed on your boat indicate current operating conditions for the engine and
related systems. When you take delivery of your boat, ask your dealer about the normal readings of
the gauges. This provides you with a reference point to evaluate how well your boat is operating.
Keep in mind that the readings on some gauges tend to fluctuate. You should investigate the cause
for gauge readings that show a constant or sudden change from the normal reading. Note below a
Azure dash. Your dash may be different depending on the model of Azure you own. However, the
gauge descriptions to follow provide you with the basic use of all gauges used by Azure. Note that
not all gauges listed are available for all Azure boat models.
AZ 240 Package - Shown
Your Azure may not be equipped with all of the following components. Certain components are not
available on select Azure models. See your Azure dealer for the latest product information.
Horn
Docking Lights
Nav./Anc.
Accy.
12 Volt Accy.
Bilge
In some cases, the horn is a RED switch
Use only while docking during poor visibility
Navigation, Anchor & Courtesy Lights
Accessories (varies with model & options)
Lights, livewell pump, etc.
Turns on power to 12 volt recept. & the stereo
Bilge pump (if applicable)
Switch Name Components Powered Switch Type
Spring loaded-toggles
off when released
2-position on/off
3-position on/off/on
2-position on/off
2-position on/off
2-position on/off
