1.
2
3
Thanks you for purchasing AZUNO digital tire pressure gauge, model
DTPG150A with hose or model DTPG150B.
Please ensure you read this user manual carefully prior to using this
product and follow the operational Instructions and guidelines correctly.
Please keep this user manual in a safe place for future reference.
First press the power button to turn on the digital tire pressure
gauge.Then press the select button to choose the correct setting.
2.
Remove the tire valve cap, place the pressure gauge on the valve
stem, and press down hard enough that the hissing sound
disappears.
3.
Keep the connection for 3-5 seconds. Wait for the reading to
become stable, and then read the results.
4.
If the pressure is too low, please inflate the tire in time If the
pressure is too high, keep the connection stable while pressing the
pressure release button to adjust the tire pressure.
1.
While the gauge is in use, hold it steady and still so that the result is
accurate.
5.
After use, remove the swivel chuck and reset the device by pressing
the pressure release button.
6.
Do not forget to put the tire valve cap back on, and then press the
power button to turn the gauge off.
*Attention*
Please read the Vehicle
Safety Manual or Car Tire
Pressure Standard Mark
before you adjust the tire
pressure, and
adjust it according to its
actual requirements.
Settings
Size of Swivel Chuck
8mm Standard Chuck
Minimum Increment
0.1PSI, 0.1BAR Stainless Steel Hose Length
(Model DTPG150A Only)
30cm
Accuracy
±1%
Reference of Tire
Pressure
2.1-2.5BAR
30-36PSI
Power Source
2xAAA
Gauge Display
Screen Size
20×φ60mm
Measurement Range
Unit Conversion
0-150 PSI, 0-10.34 Bar, 0-10.55 kg/cm²,0 -1.03MPA
PSl, BAR,
MPA, KG/CM²
1BAR=1.02KG/CM =0.102MPA=14.3PSI
2
Acknowledgement
Product description:
Instructions for use
Usage tips
Swivel Chuck
LCD Display
Select Button
Power Button
Pressure
Release
Button
