Aztech VC3000, User Manual

Page: 8 / 20

8
Correctly insert two (2) AAA batteries in the
Remote Control’s battery compartment
while observing the correct polarity.
•
In using the Remote Control, ensure that
you are 4 meters near the vacuum cleaner
and that the Remote Control is properly
aimed at the vacuum cleaner’s sensor.
•
NOTE: Incorrect battery installation may
damage the Remote Control and or cause
unexpected operation failures.
**OBSERVE POLARITY
4 METERS
** Aim the Remote Control at
the vacuum cleaner’s sensor
tiPS iN USiNG thE REMotE CoNtRoL
DoCK. Press this button and the vacuum cleaner
will automatically proceed to its Docking Station
to charge.
•
UV. Press this button and the vacuum cleaner will
turn the UV lamp ON or OFF.
•
MUtE. Press this button and the vacuum cleaner
will enter mute cleaning mode.
•
SPot. Press this button and the cleaner will enter
spiral cleaning mode.
•
PoWER. Press this button and the cleaner will enter
sleep mode.
•
tiME. Press this button to enter time/schedule
cleaning mode.
•
NOTE: Press and hold this button for ten (10)
seconds to wake up the vacuum cleaner.
DARK. Press this button and the vacuum cleaner
will enter dark area cleaning mode.
•
AUto. Press this button and the vacuum cleaner
will enter automatic cleaning mode.
•
Arrow Buttons. Press any of these buttons and the
cleaner will correspond to the direction of the
button pressed.
•
oK. Press this button to confirm entered settings.
You may also press this button to enter blocker
following cleaning mode.
•
REMotE CoNtRoL BUttoNS