V300ATA VoIP User Manual
- 7 -
4. Setting up your V300ATA router functionality via GUI
4.1 Access to V300ATA GUI.
To configure your V300ATA, you need to login to the device using a web browser.
i) Connect the V300ATA as shown in the Section 3.
ii) Launch your web browser.
iii) Type in
10.0.0.99
at the Address bar and press Enter key.
(Note:
10.0.0.99
is the default IP address for Router).
4.2 Setup Mode.
Upon successfully logging in, the Setup mode screen as shown below is displayed.
Note :
Please refer the Easy Start Manual, ”Step 5 VoIP Configuration Setup” for the details
Figure 4.1: Setup Page
